Parts

- Performance unisex saddle - Short nose allows for a more aggressive, aero riding position - Pressure relief channel provides all day comfort - Wide rear width provides additional stability - Tuned to deliver comfort on race day All day performance Push yourself beyond your limits with our latest racing saddle design. Engineered for lightning speed – and comfort – the short design lets you hold an aggressive riding position for longer – letting you fix your seating position and focus on the ride ahead. - Rails: Carbon (9x7mm) - Base: Flexible Nylon - Cover: Waterproof microfibre - Profile: Flat - Weight: 182g - Width: 142mm - Length: 240mm - Mid rail to saddle topper: 45mm Short for speed The latest evolution of our award-winning Line Saddle, we’ve combined our technological know-how and experience along with thousands of riding hours on the roads to create a saddle with performance-first ergonomics. The innovative design is tuned for race-day comfort – it features a shorter nose, broader rear section, and large cut-out. All these qualities allow you to maintain your preferred aggressive riding position for the whole ride, whatever the gradient. Increase your endurance Go further and faster for longer with the Line-S saddle. Based around our popular Line saddle design, it has a single, split-piece microfibre pad with a full-length central relief channel to decrease pressure on the pudendal artery. The Line S is specifically designed for unrivaled comfort on an all-out performance saddle. Our state-of-the-art Line-S saddle design builds in comfort to every ride. Our unique three-part construction strips away the compression and tension found in traditional hard, stretched-cover saddles. We do this by bonding a waterproof microfibre upper straight onto a flexible base, allowing us to use a softer foam, giving you added comfort, whether you’re heading to the podium or your new PB. Flat is for flat out/ Our Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement.

- Performance unisex saddle - Short nose allows for a more aggressive, aero riding position - Pressure relief channel provides all day comfort - Wide rear width provides additional stability - Tuned to deliver comfort on race day All day performance Push yourself beyond your limits with our latest racing saddle design. Engineered for lightning speed – and comfort – the short design lets you hold an aggressive riding position for longer – letting you fix your seating position and focus on the ride ahead. - Rails: Carbon (9x7mm) - Base: Flexible Nylon - Cover: Waterproof microfibre - Profile: Flat - Weight: 188g - Width: 155mm - Length: 240mm - Mid rail to saddle topper: 45mm Short for speed The latest evolution of our award-winning Line Saddle, we've combined our technological know-how and experience along with thousands of riding hours on the roads to create a saddle with performance-first ergonomics. The innovative design is tuned for race-day comfort – it features a shorter nose, broader rear section, and large cut-out. All these qualities allow you to maintain your preferred aggressive riding position for the whole ride, whatever the gradient. Increase your endurance Go further and faster for longer with the Line-S saddle. Based around our popular Line saddle design, it has a single, split-piece microfibre pad with a full-length central relief channel to decrease pressure on the pudendal artery. The Line S is specifically designed for unrivaled comfort on an all-out performance saddle. Our state-of-the-art Line-S saddle design builds in comfort to every ride. Our unique three-part construction strips away the compression and tension found in traditional hard, stretched-cover saddles. We do this by bonding a waterproof microfibre upper straight onto a flexible base, allowing us to use a softer foam, giving you added comfort, whether you're heading to the podium or your new PB. Flat is for flat out/ Our Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement.

Enjoy unparalleled comfort and performance in a saddle shaped for you. The groundbreaking design reinvents saddle making to create an incredibly responsive, comfortable, light and durable saddle. Shallow is for everyone: The Shallow profile has a more rounded rear section and medium padding. This profile is for riders leaning forwards, in a more natural riding position; typically the handlebars will be slightly lower than the saddle with the rider’s weight being split between the saddle and handlebars more evenly, requiring less padding on the saddle. - Award-winning construction technique - Flexible base and soft foam - Three profiles to suit your riding style - Suitable for all cycling disciplines - Multiple ‘Best in Test’ winner - Rails: Carbon (7 x 9mm) - Base: Carbon - Cover: Waterproof - Profile: Shallow - Weight: 182g - Width: 142mm - Length: 282mm - Mid rail to saddle topper 49mm

Fizik's Performance Bar Tape is made of Microtex, a perforated synthetic leather that's smooth and grippy, even when wet. High density foam padding keeps your hands comfortable on long rides and stitching details keep your bar tape looking sharp.

Fi'zi:k's line of Terra bar tapes are designed for those who go off-road on drop bars. Bondcush is a layered mid-padding polymer foam that aids the absorption of road buzz. Bonded to a microtex outer layer this material blend is Fi'zi:k's chunkiest option that combines comfort, versatility, and durability, ideal to tackle all kind of roads. A sticky gel backing serves two functions: it replaces the adhesive tape for an easy removal during cleaning and damps off-road chatter without feeling too squishy. - Bondcush construction 3mm thick - Gel backing - Tacky touch

Ride comfortably all day with Fizik's popular Arione Donna saddle. This women's seat features Fizik's Wing Flex shell, which flexes slightly for comfort and a premium fit. You'll also love the smooth Microtex material that allows your legs to slide more freely for more efficient pedaling. Plus, the Kium rails add lightness and durability.

A ride-compliant e-bike saddle designed to enhance the experience of riding a pedal-assisted full-suspension mountain bike. A ride-compliant, off-road saddle designed to complement the experience of riding a pedal-assisted full-suspension mountain bike. As part of the new Fizik range of short-nosed saddles, the Aidon is specifically designed for use with full-suspension E-MTBs. The shorter shape puts riders in a more planted position, making for greater stability, confidence and control when riding heavier pedal-assisted bikes. A gradual transition from nose to side wings allows smooth position changes while guiding the bike. The waved kick tail provides lower-back support to help riders hold their position while tackling technical climbs as well as giving greater control during the electric kick of assistance. Once you've conquered the climbs and you head downhill with your dropper post lowered, the saddle becomes a control device. The Terra Aidon's rounded contours allow smooth and fast movement of your legs around the saddle to help you stay on course. Since more time is spent in a seated position on an E-MTB than during traditional riding, the Terra Aidon features a specific ergonomic cut- out, designed to relieve pressure on sensitive areas. A rubber layer at the bottom of the cut-out functions as a mud flap, blocking unwanted dirt and spray from the trails. Additionally, to increase comfort, our E-MTB saddle is padded with a proprietary Type-2 foam that's thicker around the ischial sit bones area to support a more upright riding posture, as well as on the sides for better maneuverability and comfort while pedaling at a high cadence. For pedal-assisted all-mountain use, the Terra Aidon has been engineered with a compliant shell to offer a higher level of flexibility. This controlled elasticity absorbs vibrations for increased comfort. To better support the Terra Aidon's flexible shell, we used our closed-loop Mobius rail system for increased structural stability and responsiveness. - AIDON: a cushioned short-nosed saddle designed for pedal assisted bikes - X5: a combination of a ridecompliant fiber reinforced nylon shell and an S-Alloy rail - MOBIUS RAIL: Closed loop design for added strength and weight distribution - WINGFLEX: the shell's side edges flex and adapt to a rider's inner leg movement - TYPE 2 FOAM: Progressive cushioning, with a lower compression modulus - TERRA: all-terrain series designed to take you beyond your boundaries - INTENDEND USE: E-MTB - Length: 255 mm - Height at 75mm width: 51 mm - Rail: 7x7mm

Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

Designed originally for the Brooks Saddle, this cover will fit most bike seats. - Made with 200 Nylon Oxford with a laminated urethane layer - The cover has a cord lock and bungee draw cord to help pull in any excess fabric - When not in use the cover can be cinched under the saddle

The K-EDGE Road Chain Catcher is THE Original Chain Catcher used by professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The K-EDGE chain catcher is a simple add-on component machined to precision which improves the overall function of your drive train and protects your valuable frame from dropped chains. - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third party braze-on adapter clamps - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No

The Kink Linear DX cable features an outer linear strand housing, which decreases bind when the cable twists during tricks. The custom brass lever lug allows the inner wire to twist freely within the brake lever eliminating twist and bind even further. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated Linear Strand - Wire: 1.5mm Pre-Stretched Slick Wire - Length: 50" - Lug: Two-Piece Bind Free Brass - Weight: 2.0oz

The Rex bars are perfect if you are looking for a big pair of bars, but not enormous. Like all Kink handlebars, the Rex bars use only the best 4130 chromoly steel material and our TruTherm post-weld heat treatment process to ensure maximum strength. The 13-butted tubing design means the bars are thicker in the bends, which adds strength where bars need it most. TECH SPECS - Rise: 9.5-inches - Width: 29.5-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: 13-Butted 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 29.0oz

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Kool-Stop's sleek, lightweight cross pad with their triple compound technology is a great choice for competitive cross bike racers. Features: - Forged Alloy Holder - Triple Compound - Lightweight Design Specifications: - Overall length: 54.5 mm - Pad contact width: 7.5 mm

The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g

Balance is the key to optimum performance in a stage race. Experience the perfect blend of grip and comfort that teams AG2R La Mondiale Pro Cycling Team, Lotto Soudal and Movistar Team use to win in the pro peloton.

Our thickest bar tape is ideal for your next double century, gravel grinder or cyclocross race. Discover why our Pro Tour teams spec this tape for the Spring Classics.

- DSP Bar Tape V2 features a new pattern, an upgraded polymer and a screw-in bar plug - The new pattern is more technical with a new design and multiple layers of depth - The polymer has new formula enhanced for more durability and comfort - The new plug provides a clean, tight finish.

- Cover up those unfinished and unused FD mounts with MRP cover plates - Offered in Decapitator version with built-in bottle opener - Alloy with matching alloy fastener, 12g - Made in Grand Junction, CO USA

High performing square bottom bracket interfaces with English frames. - Fits square-taper spindle cranksets - Alloy adjustable cups - Includes 2 axle bolts

MS-series twist shifters are quantity-tested, easy to use, and quick to setup. - Includes shift cable - Indexed left shifter works for double or triple

Compatible with most Shimano drivetrains, microSHIFT thumb tap shifters have durable bodies with ergonomic shift levers that make it easy to get bikes going again. - Include shift cables - Visible gear indicator

The MS25 twist shifter from microSHIFT is designed to be simple and easy to use. - Compatible with Shimano derailleurs - Left shifter is indexed

MicroSHIFT ADVENT Xpress shifters feature ergonomic levers and precise, durable indexing for reliable performance in a variety of situations. - Sealed bearings for extra light shifting, especially when paired with clutch derailleur - Ergonomic trigger placement - Aluminum bracket - Compatible with microSHIFT ADVENT only

These 9-speed cassettes are nickel plated for durability and constructed using the same processes as microSHIFT's higher-end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel-plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 9-speed systems - Steel lock ring Gear combinations: - 11-25T: 11-12-13-15-17-19-21-23-25 - 12-25T: 12-13-14-15-17-19-21-23-25 - 11-28T: 11-12-13-15-17-19-21-24-28 - 11-32T: 11-13-15-17-19-21-24-28-32 - 11-34T: 11-13-15-17-19-21-24-28-34 - 11-36T: 11-13-15-18-21-24-28-32-36

Sometimes less is more. With 10 speeds, an 11-48T range, and evenly spaced gear steps, the ADVENT X cassette allows riders to shift less often to find the right gear, while still having enough range to ride what they want. Fewer cogs also means less weight and a wider chain for better mud shedding. It even fits on standard 10-speed freehub bodies so you don't need to buy new wheels for no reason. In short, it's everything you want in a high-end drivetrain. - 11-48T range with even gear steps for predictable gear changes - Hardened steel cogs are optimized for eBike compatibility - ED black with anodized surface finish - Continuously forged precision cogs

Top-load design stem with a 6061 aluminum cast body and cold-forged cap for added strength. Recessed sides and front make the Control Stem simple, sleek, and lightweight. The traditional 50mm reach and generous 32mm rise make for a comfortable ride. Product Specifications - Material: 6061 Aluminum - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Bolts: M8 x P1.25 6mm - Weight: 10.4oz

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm

The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform. - 17mm thick at center - 105mm wide - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach

- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)

Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated. - High-strength plastic composite

The Twisted Pro pedal features a larger body shape, slimmer height and more concave. - Loose-ball bearing

Odyssey Big Stitch seat is just that, a durable black canvas seat with a big Slugger logo stitched on it. Subtle and tonal with red woven label detail.

We made this post to honor your most adventurous days on the trail. From the quadzilla climbs to the serpentine descents, the Loam Dropper capitalizes on PNW's best-in-class reliability in our shortest, lightest, and most customizable package yet. The new Loam also features swappable silicone bands that hug the midcap, giving you the opportunity to match your bike (or mood). UPGRADED TRAVEL PLANS By shortening the overall post and adding 25mm of Tool-Less Travel Adjust we’ve guaranteed you more drop across a wider variety of frame designs, sizes, and body types. This means more distraction-free descents with less awkward high fives from your saddle when the trail gets rowdy. UNDER PRESSURE Slow and controlled or swift and poppy? Dial-in your dropper’s return rate with personalized pressure, courtesy of the Loam Post’s adjustable air cartridge. MAKE IT YOURS The Loam Post features a machined channel on the mid-cap that's home to a swappable silicone band. Each post comes with our standard Blackout Black band but we offer our full range of colors to match your bike, PNW cockpit or personal chakra aura.

One of the single biggest improvements you can make to your fork. Engineered and developed over several years, the PUSH Ultra Low Friction fork seals provide class leading sealing while offering incredibly low friction, resulting in an increase in small bump sensitivity. - Advanced friction-reducing, Molybdenum filled material increases small bump sensitivity while also increasing durability - Dual scraping lip design provides maximum scraping effect while minimizing friction - Loaded oil sealing lip integrated into wiper to keep lower leg fluid from escaping fork, increasing performance and durability - High-volume, absorbent foam rings ensure consistent lubrication improving seal life and bump sensitivity - Molded utilizing precision 3D machined molds for exact tolerance

• Anodized alloy cap • Fits handlebar inner diameter from 17.5mm • For MTB and Road use • Low profile design • Black plated bolt

- 3D forged AL-2014 construction - Sizes: 50 - 130mm, 10 deg. angle - Suitable for 1-1/8" forks - Diameter handlebar clamp: 31.8mm - Headlock system for a secure front clamp fixation

The Vibe Superlight handlebars feature a compact design and an ergonomic oversized top section for supreme comfort on the road. It's constructed of a super-light UD carbon fiber layup with Innegra fiber. The integrated brake and shift cable routing matches perfectly with Shimano Di2.

The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.

The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.

The Problem Solvers SpaceOuts Set includes 2 5mm hex bolts and spacers that let you add space between your bottle cage and frame. This comes in handy on frames with clamp-on front derailleurs and tight clearance for cage mounting.

The Problem Solvers BB30/Press-Fit 30 Adapter Kit consists of DuPont Delrin (a tough, light type of plastic) pieces that allow you to use your external bottom bracket-style crankarms (24mm spindles, such as a Shimano Hollowtech II crank) with newer BB30 and Press-Fit 30 bottom brackets. Please contact us if you have any questions about compatibility.

The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!

The Dimension Space is designed to fit riders that need a semi & round shape, with "medium-low pelvic rotation/flexibility and wider ischial bone distance. The Special Channel we call "PAS" (wider and deeper) eliminates numbness and reduces the compression of soft tissues, improving blood flow in the pelvic area. The extra 7mm of padding with special density foam and 153mm width ensures better comfort for longer rides. Prologo has created this product for women and men with a greater distance between the ischial bones that therefore require a wider saddle. This saddle is focused on extra comfort for the all-round rider and all genders. - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 153mm - Weight: 228g

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g

- Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family - Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits

38mm Suspension Fork Parts

External Reverb and Reverb Stealth parts that can be installed without needing to open the mechanism.