Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
$194.99
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$179.99 - $189.99
An attractive aluminum crank with hollow arms for lightweight, rigidity, and durability The newly designed crank arms offer an optimized balance between lightweight and efficiency. The crank, formed with hollow aluminum technology, is anodized with a beautiful gloss black anodized finish, giving it a luxurious look. The resin ribs on the back of the chainrings are SHIMANO 105's unique structural design that achieves both thorough weight reduction and crisp shifting performance. FEATURES - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWTECH II structure cuts weight yet maintains strength for better power transfer - Crank arm length: 160, 165, 170, 172.5, 175 mm - Gear combination: 50-34T, 52-36T - Q-factor: 148 mm
$180.00
Next level spin. The forged one-piece design of the SpideRing is a handsome piece of engineering and one of the finest front shifting sets available. Where it thrives: The open road, up and down hills What it's built for: Durability, efficiency Highlights: - One-piece technology makes for reduced weight and increased stiffness and durability - Fully "ramped" for flawless shifting through detailed machining - Eye-catching and unique design
$180.00
Performance unisex saddle - Short nose allows for a more aggressive, aero riding position - Pressure relief channel provides all-day comfort - Wide rear width provides additional stability - Tuned to deliver comfort on race day All day performance Push yourself beyond your limits with our latest racing saddle design. Engineered for lightning speed – and comfort – the short design lets you hold an aggressive riding position for longer – letting you fix your seating position and focus on the ride ahead. - Rails: Carbon (9x7mm) - Base: Flexible Nylon - Cover: Waterproof microfibre - Profile: Flat - Weight: 182g - Width: 142mm - Length: 240mm - Mid rail to saddle topper: 45mm Short for speed The latest evolution of our award-winning Line Saddle, we’ve combined our technological know-how and experience along with thousands of riding-hours on the roads to create a saddle with performance-first ergonomics. The innovative design is tuned for race-day comfort – it features a shorter nose, broader rear section, and large cut-out. All these qualities allow you to maintain your preferred aggressive riding position for the whole ride, whatever the gradient. Increase your endurance Go further and faster for longer with the Line-S saddle. Based around our popular Line saddle design, it has a single, split piece microfibre pad with a full-length central relief channel to decrease pressure on the pudendal artery. The Line S is specifically designed for unrivalled comfort on an all-out performance saddle. Our state-of-the-art Line-S saddle design builds in comfort to every ride. Our unique three-part construction strips away the compression and tension found in traditional hard, stretched-cover saddles. We do this by bonding a waterproof microfibre upper straight onto a flexible base, allowing us to use a softer foam, giving you added comfort, whether you’re heading to the podium or your new PB. Flat is for flat out/ Our Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement.
$180.00
- Performance unisex saddle - Short nose allows for a more aggressive, aero riding position - Pressure relief channel provides all day comfort - Wide rear width provides additional stability - Tuned to deliver comfort on race day All day performance Push yourself beyond your limits with our latest racing saddle design. Engineered for lightning speed – and comfort – the short design lets you hold an aggressive riding position for longer – letting you fix your seating position and focus on the ride ahead. - Rails: Carbon (9x7mm) - Base: Flexible Nylon - Cover: Waterproof microfibre - Profile: Flat - Weight: 182g - Width: 142mm - Length: 240mm - Mid rail to saddle topper: 45mm Short for speed The latest evolution of our award-winning Line Saddle, we’ve combined our technological know-how and experience along with thousands of riding hours on the roads to create a saddle with performance-first ergonomics. The innovative design is tuned for race-day comfort – it features a shorter nose, broader rear section, and large cut-out. All these qualities allow you to maintain your preferred aggressive riding position for the whole ride, whatever the gradient. Increase your endurance Go further and faster for longer with the Line-S saddle. Based around our popular Line saddle design, it has a single, split-piece microfibre pad with a full-length central relief channel to decrease pressure on the pudendal artery. The Line S is specifically designed for unrivaled comfort on an all-out performance saddle. Our state-of-the-art Line-S saddle design builds in comfort to every ride. Our unique three-part construction strips away the compression and tension found in traditional hard, stretched-cover saddles. We do this by bonding a waterproof microfibre upper straight onto a flexible base, allowing us to use a softer foam, giving you added comfort, whether you’re heading to the podium or your new PB. Flat is for flat out/ Our Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement.
$180.00
- Performance unisex saddle - Short nose allows for a more aggressive, aero riding position - Pressure relief channel provides all day comfort - Wide rear width provides additional stability - Tuned to deliver comfort on race day All day performance Push yourself beyond your limits with our latest racing saddle design. Engineered for lightning speed – and comfort – the short design lets you hold an aggressive riding position for longer – letting you fix your seating position and focus on the ride ahead. - Rails: Carbon (9x7mm) - Base: Flexible Nylon - Cover: Waterproof microfibre - Profile: Flat - Weight: 188g - Width: 155mm - Length: 240mm - Mid rail to saddle topper: 45mm Short for speed The latest evolution of our award-winning Line Saddle, we've combined our technological know-how and experience along with thousands of riding hours on the roads to create a saddle with performance-first ergonomics. The innovative design is tuned for race-day comfort – it features a shorter nose, broader rear section, and large cut-out. All these qualities allow you to maintain your preferred aggressive riding position for the whole ride, whatever the gradient. Increase your endurance Go further and faster for longer with the Line-S saddle. Based around our popular Line saddle design, it has a single, split-piece microfibre pad with a full-length central relief channel to decrease pressure on the pudendal artery. The Line S is specifically designed for unrivaled comfort on an all-out performance saddle. Our state-of-the-art Line-S saddle design builds in comfort to every ride. Our unique three-part construction strips away the compression and tension found in traditional hard, stretched-cover saddles. We do this by bonding a waterproof microfibre upper straight onto a flexible base, allowing us to use a softer foam, giving you added comfort, whether you're heading to the podium or your new PB. Flat is for flat out/ Our Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement.
$179.99
A ride-compliant e-bike saddle designed to enhance the experience of riding a pedal-assisted full-suspension mountain bike. A ride-compliant, off-road saddle designed to complement the experience of riding a pedal-assisted full-suspension mountain bike. As part of the new Fizik range of short-nosed saddles, the Aidon is specifically designed for use with full-suspension E-MTBs. The shorter shape puts riders in a more planted position, making for greater stability, confidence and control when riding heavier pedal-assisted bikes. A gradual transition from nose to side wings allows smooth position changes while guiding the bike. The waved kick tail provides lower-back support to help riders hold their position while tackling technical climbs as well as giving greater control during the electric kick of assistance. Once you've conquered the climbs and you head downhill with your dropper post lowered, the saddle becomes a control device. The Terra Aidon's rounded contours allow smooth and fast movement of your legs around the saddle to help you stay on course. Since more time is spent in a seated position on an E-MTB than during traditional riding, the Terra Aidon features a specific ergonomic cut- out, designed to relieve pressure on sensitive areas. A rubber layer at the bottom of the cut-out functions as a mud flap, blocking unwanted dirt and spray from the trails. Additionally, to increase comfort, our E-MTB saddle is padded with a proprietary Type-2 foam that's thicker around the ischial sit bones area to support a more upright riding posture, as well as on the sides for better maneuverability and comfort while pedaling at a high cadence. For pedal-assisted all-mountain use, the Terra Aidon has been engineered with a compliant shell to offer a higher level of flexibility. This controlled elasticity absorbs vibrations for increased comfort. To better support the Terra Aidon's flexible shell, we used our closed-loop Mobius rail system for increased structural stability and responsiveness. - AIDON: a cushioned short-nosed saddle designed for pedal assisted bikes - X5: a combination of a ridecompliant fiber reinforced nylon shell and an S-Alloy rail - MOBIUS RAIL: Closed loop design for added strength and weight distribution - WINGFLEX: the shell's side edges flex and adapt to a rider's inner leg movement - TYPE 2 FOAM: Progressive cushioning, with a lower compression modulus - TERRA: all-terrain series designed to take you beyond your boundaries - INTENDEND USE: E-MTB - Length: 255 mm - Height at 75mm width: 51 mm - Rail: 7x7mm
$129.99 - $171.99
- Lighter And Intuitive Shifting Operation - Natural Front Shift Lever Stroke - More Ergonomic Power Curve - New Link (Toggle) Construction - Precise & Easy Front Derailleur Set Up - More Cable Routing Options - Integrated Cable Tension Adjustment - Link (Toggle) Construction For No Need Of Tl-Fd90 And Turning Converter Assembling - Adjustable Cable Tension On The Front Derailleur - Adapted For Race Specific Frame Design - Available Wider Front Gear Pitch - Shorter Length Of Rear Center With O.L.D. 135mm - Largest Chainrings (2x): 46-55T - Chain Stay Angle: 61-66 - Chain Line: 43.5mm
$170.00
Rise and shred. A lightweight carbon MTB riser bar born to rip. Where it thrives: In competition, challenging trails What it's built for: Precision, control, durability Highlights: - Carbon fiber construction - Lightweight - 780mm wide, 9 deg backsweep, 4 deg upsweep, 31.8 diameter
$165.00
Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle. - 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side - Removable cups are machined from 7000 series aluminum - Unique taper is not compatible with Shimano - Weight: 220 grams
$19.00 - $165.00
Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner
$164.99
The Shimano Deore XT CS-M8100 12-speed cassette is optimized with rider-tuned wide-range and close step gear combinations for MTB excellence. - Shift ramp designs provide fast and smooth shifts by HYPERGLIDE+ technology - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - Cassette Body Type: Shimano Micro Spline - Cassette Cogs: 10-12-14-16-18-21-24-28-33-39-45-51 - Drivetrain Speeds: 12 - Range: 10-51
$164.99
The Phenom Expert is a mountain bike saddle that's designed for comfort and strength over long days on the trail. It features a carbon-reinforced construction at the shell, along with Specialized's Adaptive Edge base that allows the outer edge to conform to your body for a near-custom fit. This version, unlike the Pro, has rugged titanium rails for lightweight durability, and like the Pro, it has a medium density, Level Two Padding for ample support and comfort. Likewise, at the tail, you'll find the Phenom hallmarks of a rounded, anti-snag design, and throughout the saddle, an expertly tuned construction that provides the ideal degree of both stiffness and efficiency. - Patented Body Geometry Design is lab tested to assure blood flow to sensitive arteries. - Carbon-reinforced shell with flexible Adaptive Edge technology adapts to your body for a custom fit and all-day comfort. - Low friction panels on the nose and tail improve pedaling efficiency and mobility while moving ‘on and off’ the saddle. - Lightweight and tough, hollow titanium rails. - Lightweight and supportive PU foam for increased comfort on longer rides. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 248g - Size 155mm / Weight 254g
$163.00
Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, Etc.) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work! Please purchase Wheels Mfg. FSA 24.07x37 ceramic hybrid bearings separately
$150.00 - $160.00
Ride comfortably all day with Fizik's popular Arione Donna saddle. This women's seat features Fizik's Wing Flex shell, which flexes slightly for comfort and a premium fit. You'll also love the smooth Microtex material that allows your legs to slide more freely for more efficient pedaling. Plus, the Kium rails add lightness and durability.
$155.00
Full Pin technology uses eleven lightweight, stamped steel cogs held together with 123 high-strength stainless steel pins. The result: a cassette that’s light, durable and equipped with SRAM’s super wide 10-42T gear range that’s a perfect fit for any ride. The open design aids in mud clearance, giving you cleaner shifting performance and longer component life. • Super wide 10-42T gear range is a perfect fit for any ride • Optimized gear steps across entire range • XD driver body creates more stable hub connection
$130.00 - $150.00
Keep it low and aero without sacrificing comfort. The titanium-railed, lightweight Specialized's Romin EVO Expert Gel is a road saddle contoured to put you in a position for optimal power transfer and comfort as you put pressure on your competition. Its supportive foam and gel inserts increase comfort even while in a competitive, more aerodynamic position, while the Body Geometry channel is designed to maximize blood flow while riding. - Patented Body Geometry design is lab tested to assure blood flow to sensitive arteries. - Stiff, carbon-reinforced shell for longevity and all-day riding efficiency. - Lightweight and supportive PU foam with gel inserts for increased comfort on long rides. - Lightweight and durable, hollow titanium rails. - Tough, lightweight, water resistant Micromatrix cover. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$137.99 - $149.99
Shimano's Deore Crankset features the efficiency and fast shifting to let you make the most out of the trails. Two-piece construction, outboard bottom bracket bearings, and hollow-forged crankarms transfer your power quickly and smoothly to the rear wheel. Shimano's computer-designed chainrings have the benchmark front shifting the company is known for.
$149.99
PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65
$149.99
Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, etc.) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means smooth operation, fast bearing replacement, and no more creaking. - Bearings: ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work! Please purchase Wheels Mfg. FSA 24.07x37 ceramic hybrid bearings separately.
$147.99
Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises these super-stiff, hollow outer rings, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command. - Bolt circle diameter: 4-bolt 110mm asymmetric - 50T pairs with 34T inner ring - 52T pairs with 36T inner ring - 53T pairs with 39T inner ring Inner rings sold separately
$144.26
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 30mm spindle cranks in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames. Bottom Bracket Includes: - BB Cups with bearings - 2x - Silicone dust seals - 2x - 0.5mm crank spindle spacers - 2x - 1.0mm crank spindle spacers - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm Asymmetrical - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 158g
$139.99 - $140.00
For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with the long-nosed, curved profile of the Romin Evo Comp saddle, with its hollow Cr-Mo rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Light, durable, and hollow Cr-Mo rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$139.99
T47 threaded BB cups for T47 frames and 24.00mm spindle diameter cranks. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 24.00mm - Over Bearing Width: 91.5mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 119g
$129.99
Next level spin. The forged one-piece design of the SL SpideRing is a handsome piece of engineering and one of the finest front shifting sets available. Where it thrives: The open road, up and down hills What it's built for: Durability, efficiency Highlights: - One-piece technology makes for reduced weight and increased stiffness and durability - X-Sync thick/thin tooth profiles for secure chain management - Eye-catching and unique design
$129.99
Just because your hands are comfortably resting on the tops of your handlebars, it doesn't mean you shouldn't be able to shift gears. With Shimano's Di2 Remote Satellite Shifter, you're just a simple, light button push away from shifting perfection. These phenomenal accessory shifters are for use with Shimano's Di2 drivetrain components (sold separately) and can be positioned anywhere on your bars for a custom feel. Plus, these beauties feature spot-on ergonomics for smooth, controlled shifting even when you're pushing yourself to your physical limit.
$129.99
The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 1x12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount, 10x1 Standard - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 41 teeth - Largest Cog: 51 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain
$110.00 - $129.99
The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty
$125.00
The first thing to know about the XX Eagle Transmission chain is that it’s one of the strongest SRAM has ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top shape that maximizes shifting performance. The chain features a hollow pin design and is finished in a long-wearing, high durability chrome - Long-wearing hard chrome finish - Smooth shift bottom profile for ultimate shifting performance - Hollow pins save precious grams of weight - Includes PowerLock connector