Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Odyssey Grandstand PC Pedals
$19.99
The Grandstand pedal features a unique slim profile, a wide platform and a comfortable concave that feels exceptional as soon as you set foot on it. All of Odyssey's pro riders have been after them since the first samples came in. The pedal features a unique bearing configuration that allows a big spindle to be paired with a slim pedal body. - Genuinely Thin Body. - 17mm at center with uninterrupted dual concave. - Foot-sized 105mm wide. - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach. - 8 oversize plastic pins per side. - 9/16” only.
Odyssey Gyro G3 Lower Cables
$8.99
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
Odyssey MPEGs Steel Pegs
$19.99
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
Whisky Parts Co. No.9 Carbon Flat Handlebar
$150.00 - $159.99
Whisky Parts Co. carbon handlebars are tested to the highest standards to give you a high level of performance mile after mile. So keep the weight low and stay comfortable and in control while you shred with the Whisky Parts Co. No.9 Carbon Flat Handlebar. - Material: Matte UD Carbon - Rise: 0mm - Width: 840mm - Weight: 215 grams
Odyssey M2 Monolever
$24.99
The M2 lever works with a single cable or Odyssey’s patented dual cable system. The M2 cable system improves braking power for GYRO users. - Right hand only (works flipped on the left) - M2 specific upper cable and single cable coupler included.
Odyssey Mid Bottom Bracket
- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included.
Odyssey Springfield Lever
$19.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.
Odyssey Tom Dugan Tires
$25.99 - $31.99
Tom likes to ride fast and go very high. These tires were designed to help him do just that. With a fast center tread, these tires are made for park, street and even dirt too. The side profile is reminiscent of a motorcycle tire as well, which is a nod to Tom’s motorcycle lovin’ ways.
Odyssey Twisted PC Pedals
$13.99 - $19.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Crank Brothers Pedal Rebuild Kit
$14.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.
Zipp Vuka R2C Shifters
$347.00
Some people may overlook such a small part, but Zipp knows their 10-speed, carbon Vuka R2C Shifters make a big difference. The secret is their R2C (Return-2-Center) action, which keeps them (and your hands) in a straight, aero position and makes shifting easier, faster, more ergonomic and aerodynamic.
Jagwire M10 Adjusting Barrel
$19.99
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Jagwire M7 Adjusting Barrel
$11.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
FSA MegaExo 12 Left Arm Crank Bolt
$4.99
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.
SRAM CX1 X-Sync Chain Ring
$82.00 - $99.00
Mud and moving parts are enemies in the sport of cyclocross. That's why SRAM decided they were going to simplify things. Remove the front derailleur, increase the range of the cassette, make dropped chains a thing of the past, and you've got a cross drivetrain worthy of hammering. SRAM's CX1 X-Sync Chain Ring is an integral part of that system. It mates to 110 BCD cranks and features a wide-narrow-wide tooth profile to securely hold the chain through the roughest terrain. It's also specially designed with mud clearing in mind to keep your rig light and fast. A variety of sizes ranging from the spin-to-win 38T to the flat-out 46T let you dial in your rig for your strengths or course.
Shimano SLX Shadow + Rear Derailleur (Long Cage)
$79.99
SLX has always been Shimano's workhorse group: seriously solid performance, reasonable weight and all-mountain toughness. Well, this M675 version gets some trickle down features from XTR that are bound to make trail riders rejoice. This Shadow Plus derailleur retains the tucked-in Shadow profile that makes you less likely to tag it on trailside obstacles. And the Plus part is a one-way clutch that dramatically stiffens up the cage so chain slap, dropped chains, and all the associated noise are basically a thing of the past. It all adds onto SLX's legendary workhorse status.
Race Face Cinch Direct Mount Narrow-Wide Chainring
$69.99 - $74.99
Race Face Next SL Direct Mount Chainrings • 7075-T6 aluminum, aerospace grade strength • Compatible for 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the Race Face CINCH system (using tool TL6800) allowing you to switch between Direct Mount rings/spiders with ease • Utilizes Race Face proprietary spline design • Stiff 4mm plate thickness to transfer loads without flexing • 41 grams (26T) ranging up to 82 grams (36T) • Compatible with Race Face cranks with CINCH system interface
Fabric Scoop Elite
$74.99 - $79.99
Fabric's Scoop saddle is designed to provide flexibility and great ergonomic feel for all genres of cycling. Starting with their unique flexible base, vacuum bonded upper, and custom design rail, the Fabric Scoop is proven to be the perfect balance of comfort, performance and simplicity. Wide choice of colours & specification -The Scoop is versatile. A regular ‘Best in Test’ winner, it is available in a wide range of specifications and colours to suit the needs and budget of every kind of rider. 3 rider profiles -Choose the Scoop to suit. There are 3 profiles of Scoop saddle; Flat for a more aerodynamic riding position, Shallow for all-day performance and Radius for a more upright, comfort focused position. Durable & flexible -Our unique 3 part bonding process not only results in super comfort but also an easy to clean saddle with smooth lines and superb durability. -Width: 142mm -Length: 282mm -Base: Nylon -Rail: Hollow Cro-moly -Upper: Lightweight PU foam -Cover: Waterproof microfibre
Fabric Tri Race Saddle
$99.99
Performance on demand When you need a saddle to work as hard as you are, the Tri saddle delivers. Rigorously designed to meet the grueling demands of triathletes and time-trialists, the feature-packed saddle comes with integrated bottle mount and a central pressure relief channel. Innovative design Our state-of-the-art Tri saddle design builds in comfort to every ride. The unique three-part construction strips away the compression and tension found in traditional hard, stretched-cover saddles. We do this by bonding a waterproof microfiber straight onto a flexible base, allowing us to use a softer foam, giving you added comfort, wherever you're headed. Honed for perfection The Tri is sculpted for the rigors of performance cycling. 42mm shorter than our award-winning Scoop, the Tri delivers tailored support for athletes riding in an aggressive position. The split, single piece saddle, with full-length pad houses a central relief channel for endurance rides. Stay hydrated on the go, with a removable nylon bottle mount, integrated seamlessly with the rear of the saddle. There's even a bike hook molded into the base to stow your bike securely in transition zones. Durable and flexible Our unique saddle design not only gives you great comfort, but the bonded cover is super-easy to clean, with smooth lines, and superb durability. Flat is for flat out/ Our Flat profile has the flattest rear section and the lowest amount of padding. This profile is designed for the most aggressive riding position; the rider in this position will be pushing the hardest through the pedals. The Flat profile also has a thinner nose to allow better leg movement. - Rails: Titanium (7mm) - Base: Flexible nylon - Cover: Microfibre - Profile: Flat - Weight: 232g - Width: 134mm - Length: 240mm - Mid rail to saddle topper: 46mm - Three part construction method - Pressure relief channel - Integrated bike hanger - Drainage channels - Removable bottle mount
Fabric Scoop Pro
$169.99
Fabric's Scoop saddle is designed to provide flexibility and great ergonomic feel for all genres of cycling. Starting with their unique flexible base, vacuum bonded upper and custom design rail, the Fabric Scoop is proven to be the perfect balance of comfort, performance and simplicity. Available in three profiles and four specifications. Wide choice of colours & specification -The Scoop is versatile. A regular ‘Best in Test’ winner, it is available in a wide range of specifications and colours to suit the needs and budget of every kind of rider. 3 rider profiles -Choose the Scoop to suit. There are 3 profiles of Scoop saddle; Flat for a more aerodynamic riding position, Shallow for all-day performance and Radius for a more upright, comfort focused position. Durable & flexible -Our unique 3 part bonding process not only results in super comfort but also an easy to clean saddle with smooth lines and superb durability. - Width: 142mm - Length: 282mm - Base: Nylon-fibre matrix - Rail: Carbon-fibre 7mm x 9mm - Upper: Lightweight PU foam - Cover: Waterproof microfibre
Fabric Scoop Race
$99.99
Fabric's Scoop saddle is designed to provide flexibility and great ergonomic feel for all genres of cycling. Starting with their unique flexible base, vacuum bonded upper and custom design rail, the Fabric Scoop is proven to be the perfect balance of comfort, performance and simplicity. Available in three profiles and four specifications. Wide choice of colours & specification -The Scoop is versatile. A regular ‘Best in Test’ winner, it is available in a wide range of specifications and colours to suit the needs and budget of every kind of rider. 3 rider profiles -Choose the Scoop to suit. There are 3 profiles of Scoop saddle; Flat for a more aerodynamic riding position, Shallow for all-day performance and Radius for a more upright, comfort focused position. Durable & flexible -Our unique 3 part bonding process not only results in super comfort but also an easy to clean saddle with smooth lines and superb durability. -Width: 142mm -Length: 282mm -Base: Nylon -Rail: Hollow Titanium-alloy -Upper: Lightweight PU foam -Cover: Waterproof microfibre
Lizard Skins DSP 3.2mm Bar Tape
$45.99 - $49.99
As we have visited dealers throughout the world we have heard a common theme, customers want an option for a thicker bar tape! 89 inch rolls and 78 grams per set. (including plugs) The 3.2 mm DSP is Lizard's thickest tape and has a new distinct pattern. Tried and tested on the cobbles at the Paris-Roubaix course!
Shimano Ultegra 10-Speed Cassette
Shimano's Ultegra 10-Speed Cassette delivers pro-level shifting and durability. The computer-enhanced tooth shapes and tough cogs mean you can shift quickly, precisely and smoothly even under pressure.
iSSi Road Cleats
$25.00
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. Available in three different float options to suit your style. - 0, 4.5 or 9-degree cleat options - Cleat bolts and washers included - 4mm hex wrench required to install
e*thirteen by The Hive Guidering DH Chainring
$44.99
- 7075-T6 aluminum construction with 4mm width optimized for all chainguide systems to prevent chain jamming - 0.5mm step on both sides of teeth profile to retain chain - Deep recess chainring nut interface for better clearance - BCD: 104mm - Speed: 1 x 8/9/10
Zipp Service Course Seatpost
$59.99
Zipp's Service Course Seatpost is stiff, light, has excellent gripping power, and the low-profile clamp allows you to slide the saddle extra far back on the rails. The shaft and head are 3D forged from a single piece of light, tough 7075 aluminum, and the clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.
Zipp Service Course SL Seatpost
$117.00
Strong, yet light as a whisper, Zipp's Service Course SL is everything you could want in a seatpost. It's forged out of a single piece of tough 7075 aluminum, yet weighs just 220 grams. A low-profile clamp allows you to slide the saddle extra far back on the rails, giving you more room to optimize your position. The clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.
Zipp Service Course SL Seatpost
$160.00
Since the introduction of Zipp's line of Service Course SL components, they've had amazing success with pro-level athletes in all disciplines. While the successes have been coming, they've also drawn from riders' feedback. Zipp not only learned how and why athletes make their equipment choices, but how manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, they're proud to introduce a completely redesigned Service Course SL seatpost with a carbon tube and aluminum head for better shock absorption and weight savings. - Lightweight clamping system - Updated carbon tube material
Zipp Service Course SL Stem
$110.00
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp Service Course SL-70 Ergo Handlebar
$99.99 - $110.00
The same compact reach and drop dimensions as the Service Course SL-70 with a flattened top section for a natural ergonomic grip on the bar tops. A revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with a short reach to control levers vital for race situations. The bar's 70mm reach is the shortest of Zipp's new Service Course lineup. Its 128mm drop helps put the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into his or her optimal position. - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - Clip-on Compatible - ISO 4210 compliant. See Declaration of Conformity for details. - Ramp angle: 10° - Outsweep: 4° - Backsweep: 3° - Drop shape Variable - Clamp width: 110mm
Zipp Service Course Stem
$55.00 - $59.99
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp SL-70 Ergo Handlebar
$275.00 - $299.99
Light weight, comfort, and strength: The SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo improves upon the flat bar top shape of its carbon predecessor, the Contour SL bar, but also with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128 drop. The short 70mm reach allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. The SL-70 Ergo weighs only 205g but is strong and durable enough for the demands of aggressive cyclocross and gravel racing. - Unidirectional Carbon built for stiffness, comfort and light weight - Ergonomic top for all-day comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - 70mm reach - 128mm drop - Variable radius drop - Cable grooves
Wolf Tooth Components 5-Spoke GXP Direct Mount Ring
$69.95 - $74.99
Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
Wolf Tooth Components 64/104 Chainring
$59.95 - $89.99
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Cyclocross Chainring
$79.95 - $89.95
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)
$34.99
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB30 Outboard Spacer Kit
$10.00
This Wheels Manufacturing Spacer kit for BB30 Outboard bottom brackets includes 42mm ID spacers that fit between the BB30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm
Wheels Manufacturing Inc. BB30a/PF30a/BBright Adapter for 24mm Spindle Cranks
$48.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
Wheels Manufacturing Inc. Chainstay Protector - 10-Pack
$3.99
Wheels Manufacturing Clear Chainstay Protectors keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Pack of 10
Wheels Manufacturing Inc. Derailleur Hanger 123
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 18
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 21
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 32
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 49
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 58
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 61
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Notes: - PLEASE NOTE! M4 HOLES ON HANGER ARE NOT THREADED! - FRAMES USING THIS HANGER HAVE THREADS IN DROPOUT!
Wheels Manufacturing Inc. Derailleur Hanger 70
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 96
$24.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Emergency Derailleur Hanger
$24.99
The Emergency Derailleur Hanger is a great thing to bring along on rides because it lets you temporarily replace a hanger that is damaged or broken on a ride. The Emergency Hanger works with most frames and derailleurs and allows the use of most gears, and more importantly, for the bike to be ridden instead of pushed or carried. So, it ensures that you can get home safe.Mounts to virtually any dropoutWill keep your bike shifting and get you homeCNC-machined aluminum for increased durabilityBlack anodized finish
Wheels Manufacturing Inc. PF30 Fat Bike ABEC-3 Bottom Bracket
$74.99
PF30 Threaded Angular Contact BB for Fat Bike. Fits Specialized Fatboy frames, and any other brand frames with PF30 x 100mm bottom bracket shell. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30 - Bottom Bracket Shell Width (mm): 100mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 130g
WTB Silverado
$39.95 - $249.95
The Silverado's long, padded nose and gradual taper provide an excellent shelf for when the going gets steep, while the broad lower wale of the outside shell creates a great shape for leaning into corners when the trail gets twisty. A slight rise and an optimized padding-to-weight ratio make the Silverado a hit across all disciplines. Ride a Silverado and you'll quickly know what everyone's raving about. Usage: Road, Cross Country, Enduro, and Trail Length: 247mm
WTB Thinline Padloc Grip
$34.99
A thin silhouette and opposing working edges provide irrefutable grip, even in the wet. The Pilot’s 28mm svelte shape provides a paired down though classic profile that features the PadLoc Relief so that even slim profiles get big comfort. - Compatible with PadLoc-ready bars only.
Vision Armrest Pads
$19.99
- Deluxe molded replacement pads fit all armrest Vision aero bars - Molded replacement pads fit the Vision Mini TT clip-ons - Dual density foam for maximum comfort - Non-slip textured top
VP Components BC-73 Square-Taper Bottom Bracket
$15.00
VP's Square-Taper Bottom Bracket is a great cartridge-style sealed-bearing square taper-spindle bottom bracket. It boasts a rugged boron steel spindle, corrosion resistant phosphated cups and an aluminum body for light weight (280 grams). It is English-threaded (1.37 x 24 tpi), comes in all the right sizes and features JIS tapers on the spindle to fit modern square-taper cranksets (not classic European cranksets).
TruVativ Power Spline Bottom Bracket
$23.99
TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included
TruVativ Sram Chainring Bolt Set
$14.99
- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly - Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)
Time ATAC Cleats 13/17-degree
$29.99
The ATAC cleats are developed for the TIME mountain bike pedal range (MX and XC range). By switching right and left cleats, you can choose two options for the release angle: 13-degrees or 17-degrees. - Weight: 45g/pair
Thomson Elite X2 Road Stem
$99.95 - $110.00
Thomson's Elite X2 Road Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X2 combines exceptional strength with light weight for a stiff stem and total control on all your rides. It has a two-bolt clamp design that's just as strong as four-bolt designs thanks to Thomson's interlocking interface and it also cuts down on the weight. Plus, the stem's low 36mm stack height gives you more options for customizing your position. And, thanks to their reversible graphics, your X2 looks great whether you run a positive or negative rise.
Thomson Elite X4 Mountain Stem
$99.95 - $109.95
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
Thomson Seatpost Collar
$39.95
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
Page 1 of 6 Next page